Blown Fuses Inala, Brisbane: Commercial Electrical Repair

Power Restored: Commercial Blown Fuses in Inala

Is there anything more stressful for a business owner than arriving at work to find the power completely cut and operations at a standstill? For a commercial shop, every minute without electricity is money lost, customers turned away, and stock potentially spoiling.

Electrical emergencies don’t stick to a 9-to-5 schedule. Recently, Fallon Solutions was called to a commercial premises in Inala where the situation was critical. Energex, the local network provider, had been forced to disconnect the power supply due to a serious fault, leaving the shop in the dark.

If you are dealing with power outages or blown fuses, understanding why it happened and how to fix it safely is essential. Here is how we got this Inala business back up and running.

The Problem: Energex Disconnection

The call from the Inala shop owner was urgent. Energex had attended the site and turned off the power at the point of supply. The diagnosis from the network provider was clear but alarming: two fuses were blown due to a significant fault within the shop’s internal wiring.

Why does Energex disconnect power? Energex manages the electricity grid (the poles and wires outside). If they detect that a private installation (your shop or home) has a severe fault that could damage their network or pose a fire risk, they will pull the main service fuses. This is a safety measure, but it leaves the business owner with a major problem: the power stays off until a licensed commercial electrician fixes the fault and issues a certificate of safety.

Common signs of severe electrical faults:

• Repeated Tripping: If your safety switches or circuit breakers trip instantly after being reset.
• Burning Smells: An acrid scent of melting plastic around switchboards.
• Flickering Lights: Persistent flickering can indicate loose connections or arcing.
• Blown Fuses: In older switchboards, ceramic fuses that physically blow and need wire replacement are a sign of overload or short circuit.

For this Inala business, the “blown fuses” were a symptom of a deeper issue that needed immediate professional attention.

The Solution: Strategic Electrical Fault Finding

Upon arrival, our priority was to locate the fault so that power could be safely restored. You cannot simply put new fuses in and hope for the best; if the underlying fault remains, the new fuses will blow instantly—or worse, cause a fire.

Here is the step-by-step process our technician followed:

1. Site Isolation: We ensured the main switchboard was completely isolated and safe to work on.
2. Insulation Resistance Testing: Using specialised diagnostic tools (Megger testers), we tested the circuits to check the integrity of the insulation. This test sends a high voltage through the cables to see if current is leaking to earth.
3. Locating the Fault: We identified a “dead short” on one of the power circuits. This means a live wire was touching a neutral or earth wire, causing a massive surge of current that blew the supply fuses.
4. The Repair: We located the damaged section of cabling—likely caused by rodent damage or mechanical stress—and performed the necessary electrical repairs. We replaced the damaged wiring with new, compliant cabling.
5. Testing and Certification: Once the repair was complete, we re-tested the circuit to confirm the fault was cleared. We then issued a Certificate of Compliance (Form 2) to verify the installation was safe.
6. Restoring Power: With the fault cleared and certified, we were able to coordinate with Energex to have the supply fuses replaced and the power turned back on.

By following a rigorous electrical fault finding procedure, we ensured the shop was safe to reopen.

The Benefits for the Business Manager

For a commercial client, a fast and compliant repair offers critical advantages:

• Business Continuity: We minimised downtime, allowing the shop to reopen and start trading again as quickly as possible.
• Safety Compliance: Meeting Energex standards is non-negotiable. Our repair ensured the business remained compliant with Queensland electrical safety regulations.
• Asset Protection: Fixing the root cause protects sensitive equipment (registers, computers, refrigeration) from future surges.
• Peace of Mind: Knowing that the wiring is sound means the owner doesn’t have to worry about another sudden blackout.

Why Choose Fallon Solutions?

Commercial electrical work requires a higher level of certification and expertise than standard residential jobs. When dealing with network providers like Energex, you need a commercial electrician who understands the protocols for reconnection.

At Fallon Solutions, we have extensive experience in commercial electrical repairs and fault finding. We understand the urgency of business interruptions. Our team is equipped to handle complex three-phase power systems, switchboard upgrades, and surge protection installation to prevent future issues. We arrive promptly, diagnose accurately, and get you back to business. For more information on our electrical services, visit our electrician trade area.

Licensed Electricians Near You

A blown fuse might seem small, but when it leads to an Energex disconnection, it becomes a major business crisis. Professional diagnosis is the only way to turn the lights back on safely and permanently.

If you are experiencing blown fuses, tripping circuits, or power supply issues in Inala or the surrounding Brisbane suburbs, don’t risk your livelihood. Contact the experts at Fallon Solutions today for rapid commercial service! Call us on 1300 054 488 or send us an enquiry here.