Electric Hot Water System Repairs Geebung, Brisbane: No Heat

Cold Showers After a Storm? Electric Hot Water System Repairs in Geebung

Is there anything worse than turning on the tap for a relaxing evening shower, only to be met with an icy blast of cold water? It’s a shock to the system that instantly ruins your day. While we often take hot water for granted, it usually only fails when we need it most—often right after a storm or power outage.

Recently, Fallon Solutions was called to a property in Geebung to help a resident facing this exact chilly reality. After a power loss event two days prior, their hot water system simply refused to heat up again. With a history of previous repairs, the homeowner was worried the unit was done for.

If your hot water has disappeared following a blackout or storm, it might not just be a tripped switch. Here is how we diagnosed and fixed the problem.

The Problem: Silence After the Storm

The homeowner in Geebung contacted us with a clear timeline of events: “Electric HWS 6 years old, No hot water after power loss two days ago.”

Crucially, the job history noted that the “Element was faulty a year ago.” This provided a significant clue.

Why Power Surges Kill Hot Water Systems: When power is restored after an outage, it often comes back with a “surge” or spike in voltage.

• The Weakest Link: If an electrical component like a thermostat or heating element is already worn or ageing, this sudden spike can be the final straw that blows the part.
• The “Reset” Myth: Many homeowners assume they just need to flick a switch back on. However, if the broken hot water system has suffered internal electrical damage, no amount of resetting will bring the heat back.
• The Age Factor: At 6 years old, a system is mid-life. Having replaced an element only a year ago suggests the unit might be working hard or dealing with poor water quality, making it susceptible to stress.

For this Geebung resident, no hot water for two days meant the tank was sitting full of cold water, and the backup boost wasn’t kicking in.

The Solution: Expert Fault Finding

Upon arrival, our licensed hot water plumber (who is also restricted electrical licensed) began a systematic hot water system fault finding process. We needed to determine if the issue was the power supply, the thermostat, or the relatively new element.

Here is the step-by-step process we used for the electric hot water system repairs:

1. Safety Isolation: We isolated the electricity supply to the unit at the switchboard. Safety is paramount when testing high-voltage appliances that contain water.
2. Electrical Testing: Using a multimeter, we tested for power at the tank. We confirmed electricity was reaching the unit, ruling out a simple fuse box trip.
3. Component Diagnosis:
   • Thermostat: We tested the thermostat for continuity. This device acts as the “brain,” telling the heater when to turn on. If the power surge fused the contact points, it would fail to send power to the element.
   • Heating Element: We tested the resistance of the immersion element. Even though it was replaced a year ago, power surges can be unforgiving.
4. The Fix: We identified the specific electrical failure caused by the power restoration spike. We replaced the faulty thermostat with a high-quality genuine part.
5. Re-Commissioning: We restored power and tested the current draw (amps) to ensure the element was heating correctly. We also checked the Pressure Temperature Relief (PTR) valve to ensure the tank was safe.

The Benefits for the Homeowner

Engaging a professional for hot water repairs rather than guessing offers immediate benefits:

• Restored Comfort: The family can shower comfortably again without boiling the kettle.
• Cost Efficiency: Fixing the specific electrical fault is far cheaper than replacing the entire 6-year-old tank.
• Safety Assurance: Electrical shorts in water heaters can be dangerous. Our repair ensures the unit is electrically safe and compliant with Australian Standards.
• Longevity: By fixing the issue properly, we help the 6-year-old system last for its full expected lifespan (usually 10-12 years).

Why Choose Fallon Solutions?

Hot water systems are a crossover trade. They involve both plumbing (water storage) and electrical (heating). When you search for “hot water repairs” in Geebung, you need a technician qualified to handle both.

At Fallon Solutions, our team are experts in all major brands like Rheem, Vulcan, and Dux. We carry the necessary thermostats, elements, and valves in our vans to fix 90% of electric hot water issues on the spot. We understand the urgency of no hot water, so we aim to get to you fast and get the job done right the first time. To learn more about our hot water services, view our hot water trade area.

Keep Your Home Comfort

Don’t let a power outage leave you in the cold permanently. If your hot water system hasn’t recovered after a blackout, it likely needs a professional reset or repair.

If you are experiencing issues with electric hot water system repairs or need a health check on your tank in Geebung, don’t wait for the water to get colder. Contact the experts at Fallon Solutions today for fast, reliable service! Call now on 1300 054 488 – We Can Be There Today! If you prefer to send an enquiry contact us here.