Proactive Flood Prevention Maintenance Chermside, Brisbane

The “Circuit Breaker” for Your Water: A Chermside Flood Prevention Story

Coming home to a flooded house is a homeowner’s worst nightmare. A burst flexible hose under your kitchen sink or bathroom basin can dump thousands of litres of water in just a few hours, destroying your floors, rotting your cabinets, and causing tens of thousands of dollars in damage.

The scary part? It often happens with little to no warning.

This exact fear is what prompted a savvy homeowner in Chermside to call the Fallon Solutions team. They didn’t have a flood; they wanted to make sure they never did. This is the story of a smart, proactive flood prevention maintenance service that has given an entire household complete peace of mind.

The Problem: An Invisible Risk Hiding in Plain Sight

The job began as a routine plumbing inspection. While on-site, our licensed plumber in Chermside identified a couple of common, yet high-risk, issues.

1. Worn-Out Mini Taps First, the “mini taps” (the small, chrome shut-off valves under the sinks) were old and showing signs of wear. These taps are your first line of defence. If a tap starts leaking, you should be able to turn this valve to shut the water off to that one fixture.

However, old ones like these are often stiff, seized, or (even worse) can start to leak themselves. This meant that in an emergency, they would likely fail. A mini tap replacement was needed.

2. The Lack of a Fail-Safe The second, and far more serious, problem was the lack of an automatic fail-safe. Like most Australian homes, the property had flexible braided hoses connecting the taps and toilets. These hoses are a known point of failure; they have a limited lifespan and can burst without warning.

If one of these hoses burst, the water would flow uncontrollably until the homeowner returned and managed to shut off the main water supply to the entire house. The risk was simply too high.

The Solution: A Proactive Plumbing Safety Upgrade

Our plumber recommended a two-part solution to not only fix the current issue but to proactively prevent a future disaster.

Part 1: Strategic Mini Tap Replacement

First, we addressed the immediate risk. Our plumber identified the most worn-out pair of mini taps and performed a complete mini tap replacement. He installed new, high-quality fittings that operate smoothly and provide a reliable, leak-free shut-off point.

Part 2: A Home-Wide Flood Stop Valve Installation

This was the most crucial part of the job. To truly understand how to reduce flood risks in your home, you need to know about this “circuit breaker” for water.

What is a Flood Stop Valve? A flood stop valve installation is one of the best investments you can make in your home’s safety. It’s a small, genius device that sits between your mini tap and your flexible hose.

Here’s how it works:

• Normal Use: When you wash your hands or fill the sink, the valve detects a normal, controlled flow of water and does nothing.
• Burst Hose Event: If a hose bursts, the valve instantly detects a sudden, uncontrolled rush of water. When this happens, an internal “fuse” trips and snaps the valve shut, cutting off the water at the source.

Our plumber professionally supplied and installed 6 pairs of these flood stop valves at all the high-risk water connection points—under the kitchen sink, the laundry tub, and every bathroom basin.

Finally, we tested every single new valve and tap. We confirmed the correct water flow and, most importantly, tested the shut-off function to ensure the home was 100% protected and leak-free.

The Benefits: Total Peace of Mind

The outcome for this Chermside homeowner isn’t just “new plumbing parts.” It’s a fundamental improvement to their home’s safety and their own peace of mind.

• 24/7 Flood Protection: The homeowner can now leave for work or go on holiday without that nagging fear of coming home to a flooded house. The valves act as a 24/7 watchdog.
• Massive Cost Prevention: A burst hose can easily cause $20,000+ in damage. The cost of a flood stop valve installation is a tiny fraction of that, making it one of the highest-return investments you can make.
• Full Emergency Control: With the new, reliable mini taps, the homeowner can now easily shut off the water to one sink if a tap ever starts to drip, without having to turn off the water to the whole house.
• Protects Property Value: Water damage is a fast-track to devaluing your home. This proactive upgrade protects the home’s structure, cabinetry, and flooring, preserving its value.

Why Choose Fallon Solutions for Your Plumbing Safety?

This job perfectly highlights the Fallon Solutions difference. We don’t just fix leaks; we prevent disasters.

• We Are Proactive: Our licensed plumber in Chermside used their expertise to identify a hidden risk and provide a long-term, preventative solution.
• We Are Safety Experts: We are specialists in modern plumbing safety technology. We know the risks and, more importantly, we know the best-practice solutions to mitigate them.
• We Are Compliant: All our work is completed to the highest Australian Standards and manufacturer specifications, so you know the job is done right.
• We Are Your Local Team: For over 50 years, we’ve been the team Queenslanders trust for honest advice and professional service.

For more information on our plumbing services, visit here.

Don’t Wait for the Worst to Happen

Go and look under your sinks. If you see braided hoses without a flood stop valve, your home is at risk. It’s not a matter of if a flexi-hose will fail, but when.

If you’re in Chermside and want to know how to reduce flood risks in your home, don’t wait for a disaster. Contact the expert team at Fallon Solutions today to book a comprehensive plumbing safety inspection. Call us on 1300 054 488 or send us an enquiry here.